DIY for Damp Walls: Complete Guide

Damp walls can be a persistent issue in many homes, causing not only aesthetic concerns but also potential health risks and structural damage. However, amidst busy schedules and financial constraints, addressing this problem often gets pushed to the bottom of the to-do list. In this blog post, we’ll explore a DIY that is practical and cost-effective and is perfect for busy homeowners looking to tackle damp walls without breaking the bank.

Understanding the Problem:

Damp walls are a common occurrence in homes due to various factors such as leaks, condensation, poor ventilation, and rising dampness. Ignoring these issues can lead to mould growth, peeling paint, musty odours, and even deterioration of the building’s structure over time.

Product to be Used: ASIAN PAINTS SmartCare -Hydro Loc Emulsion.

Points to keep in mind for the product: 

1. Do not dilute the mixture; it’s a ready mixture that should be directly applied to the wall. 
2. Use at least two coats of the product.
3. The product comes in various packaging, from 1L and 4L. 
4. The product does not work on running leakages.
5. It comes with a 5-year waterproofing warranty on Dampness and Efflorescence on plaster surfaces.
6. It is formulated to adhere to a cementitious substrate such as plastered walls/ interior walls.

Steps to follow: 

1. Make sure the actual cause of dampness/ leakage is well-treated. 
2. Let the wall dry in case it is extremely wet.
3. Scrape off any damaged paint or POP on the wall. Then, clean the wall with a cloth to remove any dust. (Any surface cracks should be filled with white cement.)
4. Now, take the Hydroloc by Asian Paints and apply a generous coat to the wall with a brush. Do apply the emulsion. Covering an additional one foot on all sides of the affected area. Let it dry for at least 6-8 hours. 
5. When the first coat completely dries, apply a second coat of the mixture and again let it dry completely. 
6. Now sand the wall with 180 sandpaper to make it smooth. Wipe it clean.

Follow these two additional steps to completely restore the wall’s appearance and match the color of the wall paint. 

1. Use Esdee Paints Interior Putty Acrylic, which is also a ready-to-use mixture. Apply one coat of putty to the affected area. Sand it with 180-number sandpaper to smooth it and level it with the adjacent wall area. 
2. After the putty has completely dried, paint the wall in the desired colour, matching the rest of the wall. 

Check out all the tools you would need here:

1. Hydroloc by Asian Paints (Click Here)
2. Brush to apply the mixture(Click Here)
3. Metal Patti to scrap off paint easily (Click Here)
4. Esdee Paints Interior Putty Acrylic (Click Here)
5. Sandpaper (Click Here)

Dealing with damp walls doesn’t have to be daunting, even for busy homeowners on a budget. Using this DIY, you can treat your walls over a weekend and make your home beautiful. Remember, a little effort now can go a long way in protecting your home and preserving its integrity for years to come.

Also, read : 3 Mistakes I Would Never Make As An Interior Designer (And How To Fix Them)

If you are looking for an interior designer in Delhi NCR, visit our portfolio at www.studiococreate.in/ or email us at [email protected]